Kowolux X3eco LED

Kuvaus

Kowolux X3eco LED
Katseluala: 450×80 mm, filmikoko 10×48 cm Luminanssi: 160000 cd/m² Suurin katseltavan filmin tiheys: 4.2 D (EN 25580 / ASTM E 1390) Teho: 250 W Mitat/paino: 530x220x205 mm / 10.7 kg Jalkakytkin ja maski filmille 10×48 sisältyy hintaan, samoin sertifikaatti
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – X-Ray Film Viewer with latest POWER-LED technique for films up to size 10×48 cm and density D 4.2.
Energy savings with new X-series viewers compared to conventional film viewers with halogen lamps are 80 to 90 percent – and there is no need of lamp exchange.
These advantages help to safe costs, time and failures of viewers due to defective lamps. In consideration of savings in energy and costs for exchange of lamps higher price compared to conventional viewers is paid back after approximately one to two years depending on time of duty.
These new viewers supply constant white light over complete control range and give higher contrast for defect interpretation of films. Because heat development is reduced by 85 %, for cooling a temperature controlled fan with lower noise level can be used.
Lifetime of LEDs is 40,000 h – at full load operation of eight hours per day this means more than 20 years.
– – – – – – – – – – – – – – – – – – – – – – – – – Specification:
•Housing made of stainless steel •Plug-in foot switch – operable without foot switch •Two Potentiometer for brightness control •Axial vent fan with temperature depended speed control – low noise level •Filter in cooling air in- / out-let – changeable •Interchangeable masks for different film sizes •Mounting threads in side panels – for mounting loading device for roll films •Mounting threads in bottom panel – for safe fixing of viewer in mobile laboratories
– – – – – – – – – – – – – – – – – – – – – – – – – Inclusive: Foot switch with plug, separate Power cord, EU type plug X3 ancillary mask for films 10×48 cm Calibration certificate – – – – – – – – – – – – – – – – – – – – – – – – – Lisävarusteiden hinnat:
Calibration certificate for X3eco: 60€ Foot switch with plug, separate: 35€ Densitometer holder, universal: 47€ KOWOSPOOL Film loading device for roll films 6, 7 and 10 cm: 552€ Spare air filter KOWOLUX X3, 2-pack: 10€ X3 ancillary mask for films 10×48 cm: 47€ X3 ancillary mask for films 10×40 cm: 47€ X3 ancillary mask for films 10×24 cm: 47€ X3 ancillary mask for films 7×48 cm: 47€ X3 ancillary mask for films 6×48 cm: 47€ X3 ancillary mask for films 6×40 cm: 47€ X3 ancillary mask for films 6×24 cm: 47€ X3 ancillary mask – hole kslash; 30 mm with magnetic stop: 59€ X3 ancillary mask – Iris slash; 4 … 75 mm: 228€ X3 ancillary mask – slit 30 mm magnetic stop and cover strips: 66€