Concrete Cover Meter NOVOTEST Rebar Detector a
Concrete Cover Meter NOVOTEST Rebar Detector, betonini raudoituksen ilmaisin
Concrete-Cover-Meter-NOVOTEST-Rebar-Detector-6-1024×683
Concrete-Cover-Meter-NOVOTEST-Rebar-Detector-8-1024×683

Betonin pinnoitteenpaksuusmittari NOVOTEST Rebar Detector

0 ulos5

1 900,00  (alv 24 % 2 356,00 )

Saatavuus: Ei varastossa, vain jälkitoimituksena Tuotetunnus (SKU): 6033-1
Näytä ostoskori

Kuvaus

Concrete Cover Meter NOVOTEST Rebar Detector is used to measure the thickness of the concrete cover, determine the location and estimate the diameter of rebar in reinforced concrete products in the conditions of enterprises, construction sites, buildings and structures in use.

MEASURING THE THICKNESS OF THE CONCRETE COVER

Measuring the concrete cover of reinforced concrete structures is the main task of the Concrete Cover Meter NOVOTEST Rebar Detector. Depending on the diameter of the rebars, the device allows user to measure the thickness of concrete with a specified accuracy of up to 170 mm.

SCANING OF TESTED OBJECT

With a special mode, the user can scan an object for the presence of an rebar and its position. If necessary, the operator can use the audible signaling of the rebar presence, which eliminates the need for constant monitoring of the device display.

ASSESSMENT OF THE REBAR DIAMETER

The device has a special mode for assessing the diameter of the rebar, it is calculated during operations according to a special method during which the minimum distance to the rebar with and without a plate with a known thickness is measured, and the device calculates the expected diameter of the rebar using the correlation method

Toimitukseen sisältyy:

  • Electronic unit
  • Probe
  • Plate
  • 2 AA batteries
  • Charger
  • Operating manual
  • Case

Varaosat:

  • Silicon Cover
  • Probe
  • Batteries
  • Charger

Ominaisuudet:

Range of measuring the thickness of the protective layer, mm5 … 170Controlled diameters, mm6-50Measurement accuracy, mm(0,03 h + 0.5)Standards

  • BS 1881, Part 204
  • DIN 1045
  • SN 505262
  • SS 78-B4

Overall dimensions, mm:
– electronic unit
– probe– 122х76х36,5
– 200x50x35Operating temperature, ° C-20 … +40 ° CPower supply2pcs AA batteriesTime of continuous work hours, not less8Weight of electronic unit with batteries, no more, kg0.2